Section Viewer

Can't find what you are looking for in the current section?

Try having a look through the other available blog categories using the menu below.

August 17, 2019

So, you fancied having an aluminium slide on your MK23, be it either the TM or one the the clone variety, but found it hard to dive deep in the pocket for Shooters Design CNC slide or never to be seen again Mafioso version?


Well with the introduction of the SSX-23 from...

August 9, 2019

It's been 8 months since we left off from our initial CONTACT! report of the controversial subject of the MK23 from Novritsch. In that article, we speculated heavily, analysed all that there was to analyse and offered up some rather mystical predictions as to what we w...

July 6, 2019

Most of us were brought in to this world with two hands and ten fingers, and that has worked out pretty well for us as a race for a good few years now... However there are notable times in our lives where having an extra hand or a couple or extra digits to help out wit...

June 8, 2019

The year is 2019, and we have been living a lie.

And just like putting on a certain pair of shades - we can finally see the truth of things.

For too long now, MK23 owners have either shyed away from TM magazines, or dreaded to work on them in order to prepare and repair...

April 15, 2019

Back in December last year, I had met up with ON MY MK's Gary in the UK en-route to a meetup of Sniper Ops players in the south of the UK. Whilst killing some time on the road as we drove to the meetup, we were discussed the consequences of using our MK23's in poor, ra...

April 12, 2019

At the time of this writing, as MK23 owners, we're pretty stuck for choice as to which nozzle we use in our pistol as no aftermarket replacement has yet to fall on our laps - and that's fine for now, after all, the nozzle does it's job pretty well and there isn't a who...

February 4, 2019

In the realm of  3D printed Airsoft parts, imitating real steel CNC designs is a bit of a grey area. We don't encourage it, but at the same time, we can't see 99% of the community justifying the purchase of some of these real steel parts, when they cost 2000% more than...

February 1, 2019

The MK23. It's such an iconic replica in the Airsoft community today, known as a powerhouse of efficiency, accuracy and reliability. In the last two years alone (in to its 10+ year reign as a monarch), the MK23 NBB has exploded in popularity, innovation and growth; so...

January 31, 2019

The Tokyo Marui MK23 LAM Unit. It's bulky, bland, bulbous and generally not very bright (without modification!), and if that wasn't enough, its not readily accessible to Clone MK23 users that actually want it! 

So, is it any wonder why most MK23 users source a rail adap...

January 28, 2019

In the firearms world, the subject of flat / straight trigger versus curved trigger is an active and highly opinionated topic. Whilst some tests and studies have been performed trying to ascertain the answer to the "Which is best?" question, it ultimately comes down to...

Please reload



The parent group on Facebook, the true source for all MK23 owners and their discoveries!

Our partner for 3D printed MK23 kits and accessories, including the famous modular carbine kit.

Our partner for truly effective 3D printed suppressors, accessories and the essential TDC cover.

Our partner in the leading designs for 3D printed holsters, pouches, rails and more.

The man behind truly masterful usage of the MK23, and an ambassador for the platform!

  • Grey Facebook Icon
  • Grey Instagram Icon

This site is currently for non-profit use, all content on this site has been obtained through author and owner's permission where required. All right's reserved.
Information and retailers / bodies throughout this site are displayed in no particular order and any material promoting one company over another is unintentional.

Need to contact the site owner? Please send an email to